How to Build a Rustic Wall Planter | The Family Handyman

Looking to fill a blank wall in your home with something other than generic department shop art? Here'south an idea. Take those planks you've got laying around in your garage and build this indoor wall planter. The planter is a nifty-looking shelf all on its ain and filling it up with an assortment of greenery volition plow what was in one case an empty wall into a thriving nursery using just a few HART Tools, found exclusively at Walmart.

Materials

  • 3 – 1×half dozen" viii' pine plank
  • 5 – ane×6" 6' pine plank
  • 25" deck screws
  • Wood stain

Tools

  • HART Drill
  • HART Record Measure
  • HART Sander
  • HART Circular saw
  • HART Level
  • HART Safety Glasses

Step one

  • Cut 8' planks to 48". You volition need a total of 5 planks at 48" long. This will exist the bankroll and the part that secures to the wall.
  • Cut 6' planks to 23". You will need 9 planks at 23". This will be the sides and the lesser of your planter boxes.
  • Cutting ane, half dozen' plank to 4.75". You will need 6 pieces at iv.75". These volition be the sides of your planter box.

Pace 2

  • Stain 48" planks gray making certain to embrace the side of each. They volition be spaced when assembling everything, and then you'll meet the sides to some degree.

Stride iii

  • Gather boxes by screwing the three 23" planks in a U shape with the bottom plank "inside" the front end and back "wall" planks. Pre-drill then the planks don't split.

Step 4

  • Assemble the 4.45" cuts to "cap" the ends "inside" the U shape. Pre-drill again to avoid splitting the edges of the planks. And then get together the 48" backing planks with .5" spacers between planks. Tip: Utilise two bar clamps and make sure the planks are level on top and bottom.

Pace 5

  • Sand all surfaces

Pace half-dozen

  • Stain the boxes

Pace 7

  • Place top and bottom boxes 5" from summit and 5" from bottom likewise equally three.25" from sides to make them symmetrical. Then screw the boxes in at an angle and become ii screws per 48" planks for security.

Pace viii

  • Place meridian of middle box at 26.75" from lesser of the backing planks and iii.35" from each side of backing planks. Screw at an angle again getting ii screws per backing plank.

Stride 9

  • Find a space on the wall and make sure y'all find studs. This planter is quite heavy and sheet rock alone will not be a sufficient support.
  • Decorate with some books and plants!


mastrohaptinseele.blogspot.com

Source: https://www.familyhandyman.com/article/how-to-build-wall-planter/

0 Response to "How to Build a Rustic Wall Planter | The Family Handyman"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel